Welcome to the season 3 finale of OTTP. The world is once again on fire as the COVID 19 infection spreads to most countries around the world. On another note, this had made for probably the most tame St Patrick's day in the tradesmens history. Mack brings us up to speed on what the Dropkick Murphys are doing for the occasion, Kevin tells us to wash our hands, and Shane drinks corona beer. Gas prices have plummeted, no one can find the anit-vaxxers, and oil is below 8 bucks a barrel at time of recording. In a relatively regular talking trades; Kevin gives the low down on his employment and misery over the last few months, Mack brings in a treat of a story with a hand broach, and Shane continues to be confusion with working with other trades. Be sure to send in your tool box/ bag pictures and jobsite art! Thanks for listening! As always get at us on our instagram or email if you have anything you want to have discussed on the show or if you just want to shoot us a line! Also if you want to send the guys a message be sure to check out the Speakpipe on the website click on the talk to us button in the bottom right of the screen! Show Sponsor:Sensational Serena; Professional CompanionSocial Media:InstagramTwitterFacebookEmailMackKevinShaneBeer SponsorWinnipeg Brew Werks PilsShoutouts@WPGBREWWERKS@tonynieuwhofDropkick murphysShow NotesCovid 19Fuel pricesArbor pressBroach Support the show (https://www.safetynetstudio.com)

On The Tools Podcast

ST PATRICKS DAY + COVID 19

Join the boys this week for a raucous episode sure to make you life cry and CRINGE. Some jaw boning this week about billie eilish's bond song and whether or not it sucks, Shane gets rocked at the dog park, and Mack shares a horrific tale of exhaust wrapping. Later in talking trades the guys the guys start a new segment about the high falutin engineering tribe, the protests around the coastal gas link project as well as the rail blockade and devastation it has wrought on the Canadian economy and people, as well as the withdrawal of the Teck Frontier mine and the mounting costs and delays surrounding the TMX pipeline and the general unraveling of the Alberta economy. Be sure to send in your tool box/ bag pictures and jobsite art! Thanks for listening! As always get at us on our instagram or email if you have anything you want to have discussed on the show or if you just want to shoot us a line! Also if you want to send the guys a message be sure to check out the Speakpipe on the website click on the talk to us button in the bottom right of the screen! Show SponsorSensational Serena; Professional CompanionSocial Media:InstagramTwitterFacebookEmailMackKevinShaneBeer SponsorWinnipeg Brew Werks PilsShoutoutsJaredFurniture Solutions Winnipeg3 phase lifestyleMidnight IndustrialShow NotesStarbucksTeck frontierTMXCoastal gas link / lng canadaChinese populationIndia populationFastenal torque chartDave ayersPink whitneyNo time to die by Billie Eilish

Fibreglass in my @$$

Join the tradesmen for a episode packed full of more content than doubled up wool socks in tight boots. The boys are happy to once again present guest Sam B on the show. The guys get down and dirty this week talking about lift kits, wheel studs, new jobs, and new ppe. Kevin is proud to showcase his first new home brew the probably a pale ale from amatuer brewing. Also this episode Sam regails us with tales of his project trucks and his take on union disputes. Speaking of which the boys go in depth on the regina Coop refinery union dispute and the toll its taking on every side. But before that a deep dive on porta band saws gets Mack riled up. Make sure you check out the video version of the podcast on Sam's youtube channel!! Be sure to send in your tool box/ bag pictures and jobsite art! Thanks for listening! As always get at us on our instagram or email if you have anything you want to have discussed on the show or if you just want to shoot us a line! Also if you want to send the guys a message be sure to check out the Speakpipe on the website click on the talk to us button in the bottom right of the screen! Show SponsorSensational Serena; Professional CompanionSocial Media:InstagramTwitterFacebookEmailMackKevinShaneBeer SponsorWinnipeg Brew Werks PilsShoutoutsRox AllenBen Jordan Local Non UnionThe Real mckenziesGuestSam BSams YouTubeShow NotesCoop RefineryCoop RefineryCoop RefineryWinnipeg protestMilwaukee porta band Traction aidsaVeSlant 6 H.sikinaSupport the show (https://www.safetynetstudio.com)

Fabricobbled Negotiations and Beer

After a brief delay here it is episode 54 of the On the tools podcast. Shane is back in Calgary, with Kevin and Mack meeting up in the peg. It was an interesting few weeks for the boys with shane heading back home to NWBC for a visit and hitting the Calgary Motorcycle show, Kevin bottled up his first batch of beer on his home brew and making onto local radio, and Mack enjoying a show from local drivers after a winnipeg snow storm. After discussion on the Iran situation, ufc 246 and the mile high club the guys are riled up and ready to get back to talking trades. This week features a continuation on shopping for new jobs, as well as commentary on the ongoing union dispute in regina. Be sure to send in your tool box/ bag pictures and jobsite art! Thanks for listening! As always get at us on our instagram or email if you have anything you want to have discussed on the show or if you just want to shoot us a line! Also if you want to send the guys a message be sure to check out the Speakpipe on the website click on the talk to us button in the bottom right of the screen! Show SponsorSensational Serena; Professional CompanionSocial Media:InstagramTwitterFacebookEmailMackKevinShaneBeer SponsorWinnipeg Brew Werks PilsShoutouts@chieffy.weefy@kinnamanjoshua@joshua_is_kidding@sherwoodmountainbeerShow Notesmile high clubThe Main Ingredient CJOB 680Calgary motorcycle showRamstein UFC 246The real mckenziesCoop regina refinery labour disputeSupport the show (https://www.safetynetstudio.com)

A Week Late and a Dollar Short

Hello and welcome to 2020, the year is off with a bang with the guys all getting together in Winnipeg to the first episode in the same room for a while. Shane travels to wpg to get together with the guys to enjoy the Hargrave market, which turned out to be a great spot for a couple of brews! This episode the guys will talk about the possibility of impending WWIII after the media is blowing up the new year with a crazy incident in the middle east. On more upbeat news the guys talk about Kev's new home brew system, peoples loose use of the word "legend" and Macks continued discovery of the internet. It is finally agreed that the alleged bison tattoo will come to fruition in the form of all the guys deciding on a location and description of the bison together! Talking trades this week covers the possibility of new jobs in the new year, with each of the guys mulling over how they would go about getting a new gig, and leaving their old ones. Mack also tells a cautionary tale on heat straightening and the good ol fashioned cut n weld. Be sure to send in your tool box/ bag pictures and jobsite art! Thanks for listening! As always get at us on our Instagram or email if you have anything you want to have discussed on the show or if you just want to shoot us a line! Also if you want to send the guys a message be sure to check out the Speakpipe on the website click on the talk to us button in the bottom right of the screen! Show SponsorA big thank you to this episodes sponsor Bulldogs PIzza!!Social Media:InstagramTwitterFacebookEmailMackKevinShaneShoutoutsThemillennialplumber @alittlepizzaheaven@sadowykevinDrowned Cow Podcast - JarettShow NotesHargrave MarketPint SizesShannon's Irish PubTorque BrewingMyth Helly Hanson PantsMotorcyclist sticks landingWpg Meth CrisisSolo Maw scenePembina Hwy fireElite CraneStick and Poke Tubby DogSmokes Poutinerie Poutine KingSupport the show (https://www.safetynetstudio.com)

Happy New Year, Happy WWIII?

Happy Holidays!  This ones for all the shift workers who are On The Tools over the holidays!As always get at us on our Instagram or email if you have anything you want to have discussed on the show or if you just want to shoot us a line! Also if you want to send the guys a message be sure to check out the Speakpipe on the website click on the talk to us button in the bottom right of the screen! Check out our Merchandise!Merch password : safetynetShow SponsorA big thank you to this episodes sponsor Bulldogs PIzza!!Social Media:InstagramTwitterFacebookEmailMackKevinShaneSupport the show (https://www.safetynetstudio.com)

The Christmas Special

Welcome to episode 50 of OTTP featuring Ryan The Porto-Plumber as guest host to kick off our holiday season! Shane and Ryan sit down this week and talk about Ryan's experiences so far landing in Calgary and settling into his new outfit. The guys also talk day to day life in 'Berta, work boots, MW, the new MX fuel system from Milwaukee, and working in rural bc crushing. Be sure to send in your tool box/ bag pictures and job-site art! Thanks for listening! As always get at us on our Instagram or email if you have anything you want to have discussed on the show or if you just want to shoot us a line! Also if you want to send the guys a message be sure to check out the Speakpipe on the website click on the talk to us button in the bottom right of the screen! Check out our Merchandise!Merch password : safetynetShow SponsorA big thank you to this episodes sponsor Bulldogs PIzza!!Social Media:InstagramTwitterFacebookEmailMackKevinShaneGuest HostRyan PlewisShout outs DevinMat Show notesKirkland WhiskeyTimberland BoondocksT max productsJoe Rogan with Edward SnowdenCOD MWCold FX troublesRock Crusher towerMount Milligan Battlefield live@battlefieldlive_yycSpring airsoft grenadeMOSFETMilwaukee heated hoodieMilwaukee MX fuelSupport the show (https://www.safetynetstudio.com)

Cowtown Throwdown with Ryan & Shane

The guys are joined once again this week by a guest Mr. Sam Boyce! Sam is a union electrician but as this episode will reveal he's a lot more than just that! Join the tradesmen this week as they once again interview the guest and get his take on a number of topics including, electrical daily carry tools, preferred boots of course, and Sam's take on the power tool choses out there today. After we find out how Sam got into the trades and met Mack, and shows off his knife he made in his own forge, the guys move on to talk about the propane shortage in Quebec, which has ties to the CN strike across the country. Later in this episode the the guys talk about Unions in the workplace vs construction unions, the new MX fuel system from milwaukee. Also this episode Mack has a quick report on the ice as he was out recently, the new COD MW, Sam's camera equipment, and tempering steel. Be sure to send in your tool box/ bag pictures and jobsite art! Thanks for listening! As always get at us on our instagram or email if you have anything you want to have discussed on the show or if you just want to shoot us a line! Also if you want to send the guys a message be sure to check out the Speakpipe on the website click on the talk to us button in the bottom right of the screen! Check out our Merchandise!Merch password : safetynetShow SponsorA big thank you to this episodes sponsor Bulldogs PIzza!!Social Media:InstagramTwitterFacebookEmailMackKevinShaneGuest HostAnthonyBeer SponsorWinnipeg Brew Werks Pilswbw.beerShoutoutsStay.Pal Nathan ParkerDrowned Cow Podcast - JarettShow NotesPropane shortage in QuebecCOD MWTradition of Knife SellingTempering guide for steelDiscordWaverley UnderpassHearthstoneSams daily carryIron lacesManitoba overtime rulesGimbleJet toolsBaffin construcSupport the show (https://www.safetynetstudio.com)

Sam B, Kevin hits Jman

Welcome to a special guest episode of the On The Tools Podcast featuring Anthony Lamoureux, a journeyman sprinkler fitter and apprentice electrician. The guys fire off questions at Anthony to get a handle on the sprinkler trade, and also his perspective on apprenticing in another trade. Also this episode the 4 get into discussion on the recent controversy around the rainbow poppy, the cold snap in berta, more debate on power tools, and fancy christmas suits. Later in Talking Trades the guys and guest get into debate on the elevator trade, Laser alignment tools and calibrations, hammer wrenching (everyone's favorite), and preparing new prints for at work.Be sure to send in your tool box/ bag pictures and jobsite art! Thanks for listening! As always get at us on our instagram or email if you have anything you want to have discussed on the show or if you just want to shoot us a line! Also if you want to send the guys a message be sure to check out the Speakpipe on the website click on the talk to us button in the bottom right of the screen!Check out our Merchandise!Merch password : safetynetShow SponsorA big thank you to this episodes sponsor Bulldogs PIzza!!Social Media:InstagramTwitterFacebookEmailMackKevinShaneGuest HostAnthonyBeer SponsorWinnipeg Brew Werks Pilswbw.beerShoutoutsFranks pizza Scott GermanSean Clemens Linder_1313 Show NotesWheelabrator Way street sign  Alberta cold snap, Union Millwright tool listRainbow PoppyJohn CarpenterWild Rose BreweryRidgid 300 Corded PipethreaderKeeyask StationConstruction ElectricianVictaulic Pipe GrooverHilti Tool FleetPotato Pancakes

Anthony The Sprinkler Fitter / Elec App

Welcome to episode 47 of OTTP! This week the guys get together to chat about the fine art of wrench chucking,  Long time friend of the show Dave loses a fish in the best way, and the guys talk about hydraulic injection. Also included in discussion on the AB windstorm and MB snowstorm, an old show is getting on the Netflix train, Kevin asks the boys about horse cocks and elephant shit,  and Shane talks about his weird n wacky day. Be sure to send in your tool box/ bag pictures and jobsite art!  Thanks for listening! As always get at us on our instagram or email if you have anything you want to have discussed on the show or if you just want to shoot us a line! Also if you want to send the guys a message be sure to check out the Speakpipe on the website click on the talk to us button in the bottom right of the screen!Check out our Merchandise!Merch password : safetynetShow SponsorA big thank you to this episodes sponsor Bulldogs PIzza!!Social Media:InstagramTwitterFacebookEmailMackKevinShaneBeer SponsorWinnipeg Brew Werks PilsShoutoutsKarlTyler Show NotesAB Windstorm MB snowstormHydraulic InjectionBombers beat StampsDBZ on NetflixWBW Dunkel Poppy campaignEdmonton window washersArc flashSupport the show (https://www.safetynetstudio.com)

Swiggin Dunkel, Slingin Wrenches

Welcome to episode 46 of the on the tools podcast. This marks the second episode since Shane's move back to Alberta and already we're working out the kinks. Apologies on the quality of the audio in episode 45. Join the tradesmen this week as they discuss the snowstorm that has blanketed MB and caused many residents to lose power. It was definitely a weekend to remember with the MB based tradesmen Kevin and Mack regaling Shane with their struggles from the weekend, while he was busy riding is motorcycle. In addition to the storm and generator talk, the guys also remind everyone to go vote as the Canadian federal election is underway with advanced polling concluding at release date. A reminder that voting day will be OCt 21st! The boys also chat about the Canadian rangers, winter commutes and tires, abattoir electrical code, heated gear, some fancy fish tanks, and being sick at work. Be sure to send in your tool box/ bag pictures and jobsite art! Thanks for listening! As always get at us on our instagram or email if you have anything you want to have discussed on the show or if you just want to shoot us a line! Also if you want to send the guys a message be sure to check out the Speakpipe on the website click on the talk to us button in the bottom right of the screen!Check out our Merchandise!Merch password : safetynetShow SponsorA big thank you to this episodes sponsor Bulldogs PIzza!!Social Media:InstagramTwitterFacebookEmailMackKevinShaneBeer SponsorWinnipeg Brew Werks PilsShoutoutsHaydenSteveKyle RobertAndreaShow Notes#MBstormPickering power stationChalk River Nuclear researchCIC officerC7A2Ranger RifleCanadian ranger patrolsCanadian ElectionBFG KO2Goodyear DuratracParmalat Winnipeg

Get Out And Vote!

Welcome back for this weeks episode of OTTP! Join the guys as they get together for the first joint Winnipeg - Calgary studios  recording. Mack and Kev are eager to rib Shane this week as Calgary just got dumped on with over 30cm of snow on sunday. In other news the show is glad announce our new sponsor BULLDOG PIZZA! In addition to the move and the early snowfall the guys also talk about winter sports, concrete physics, and our newest sponsors venue. Later on in the show in talking trade the fellas talk about kevin's new wheels, preference of work vehicle defects, and apprentice to journeyman ratios in manitoba. Be sure to send in your tool box/ bag pictures and jobsite art! Thanks for listening! As always get at us on our instagram or email if you have anything you want to have discussed on the show or if you just want to shoot us a line! Also if you want to send the guys a message be sure to check out the Speakpipe on the website click on the talk to us button in the bottom right of the screen!Check out our Merchandise!Merch password : safetynetShow SponsorA big thank you to this episodes sponsor Bulldogs PIzza!!Social Media:InstagramTwitterFacebookEmailMackKevinShaneBeer SponsorWinnipeg Brew Werks PilsShoutoutsMaxwellFu.smillieCamlarzythesparkyDrowned CowShow NotesFreybe MeatsSouthpark french fry pizzaThe FallawaysACCCorridor CrewMcsweeney cheese and pep99 PI ChinatownShannon's irish pubInnis and GunnFreedom tower concreteIndeed.caGlassdoor.caSupport the show (https://www.safetynetstudio.com)

New Sponsor, New Wheels, New "Studio"

Welcome to OTTP 44! This week on the show the guys talk jman to apprentice ratio on site, popular modular tool boxes, technical drawings, and an interesting brand of tool belt. Also featured on this episode is Mack's continuing struggling with quitting smoking, the guys go to quick snacks and breakfast routines, and the screen time of godzilla in godzilla movies. Talking trades includes a discussion on AR in the workplace, and also Mack is shocked by 3D modelling. Be sure to send in your tool box/ bag pictures and jobsite art! Thanks for listening! As always get at us on our instagram or email if you have anything you want to have discussed on the show or if you just want to shoot us a line! Also if you want to send the guys a message be sure to check out the Speakpipe on the website click on the talk to us button in the bottom right of the screen!Check out our Merchandise!Merch password : safetynetBig Thanks to our show sponsor: Paul's Hauling!!Social Media:InstagramTwitterFacebookEmailMackKevinShaneBeer SponsorWinnipeg Brew Werks PilsShoutoutsTimmerman's Tires Frigg's Natural MeatsSkylarDTM ComicsElectrical ToolsShow NotesOsteopathyOrthographical drawing Mandela EffectShazamWilsonSelf driving truckTicket to rideAtlas 46 Tac Vest and other productsActual location of Argentina Milwaukee packoutTough system from DewaltManitoba trades ratioGodzilla : King of the monstersAugmented R jet engine maintenancePrairie Electric

The Future Is Now (Even If Mack Doesn't Want It)

Welcome to season 3 of the On The Tools Podcast! The guys are pumped to get together to kick off the season with an extended version of the show. This will be the new format for the show which will be released every 2 weeks now for the near future, but never fear the guys will just be doing longer recordings in one sitting! Mack has a big annoucement, we talk silica on the job, and the revival of the 5.4L. Also on this episode the tradesmen gather in the studio to talk about the new show schedule, the merch which is online now, and plans for the this fall. Discussion on fall work schedules, a local union vote in the area, and notes left from fellow tradesmen to the "next guy". Be sure to send in your tool box/ bag pictures and jobsite art! Thanks for listening! As always get at us on our instagram or email if you have anything you want to have discussed on the show or if you just want to shoot us a line! Also if you want to send the guys a message be sure to check out the Speakpipe on the website click on the talk to us button in the bottom right of the screen!Check out our Merchandise!Merch password : safetynetBig Thanks to our show sponsor: Paul's Hauling!!Social Media:InstagramTwitterFacebookEmailMackKevinShaneBeer SponsorWinnipeg Brew Werks PilsShoutoutsStuartKipPascalFoxtrotShow NotesTongue eating parasiteSpiders in your head bookMuscular Skeletal therapy (Osteopathy)Beyond two soulsWillem DafoeEllen PagePascals love note Pipe Tabacco Nicorette gumFamily guy smoking skitClearhead pillsVW emissionsValve lappingMack's valve spring compressor, couldn't find the exact link but the tool is basically identical to this oneJohn CarpenterMGEU

From Pascal, With Love

Shane and Kevin are hosting this week. Mack is busy doing wedding prep for a close friend of his! Kevin and Shane sit down to tell some of the 5.4L stories that came down the pipes in response to the last episode. Also this episode an Australian tradie music video is featured! In addition to shoutouts, stories, and speak pipes, the guys discuss gps tracking apps for companies, Working hours and breaks, Wage schedules, and the return of the space race. Be sure to send in your tool box/ bag pictures and jobsite art! Thanks for listening! As always get at us on our instagram or email if you have anything you want to have discussed on the show or if you just want to shoot us a line! Also if you want to send the guys a message be sure to check out the Speakpipe on the website click on the talk to us button in the bottom right of the screen!Social Media:InstagramTwitterFacebookEmailMackKevinShaneBeer SponsorWinnipeg Brew Werks PilsShoutoutsLuke JaredSparkySherm MarkShow NotesSmoko Mode Dead lift historyT Sheets AppInvoice2goKidney stonesDevil may care brewingOnce Upon a time in HollywoodMud HeroBryan LotockiICI wage scheduleHBO From Earth to the MoonSaturn VApollo 11Love Death RobotsSupport the show (https://www.safetynetstudio.com)

Smoko Mode

Welcome to On The Tools Podcast, a podcast for tradespeople, by tradespeople. No filters. No bush beating. No holds barred. With 2 Millwrights and an electrician. Mac, Shane and Kevin host.

hubhopper

On The Tools Podcast

hubhopper